Wall2Floor Epoxy Binder Hardener

The Wall2Floor system from NOVACOLOR is not just microcement but a complex of preparatory and finishing materials for finishing vertical and horizontal surfaces, both in the interior and on the facade, while ensuring the proper level of performance required in each specific case.

Wall2Floor microcement can be used not only for residential but also for commercial projects, as well as in areas with heavy pedestrian traffic, which requires strengthening the characteristics of materials due to products such as W2F Epoxy Binder.

Wall2Floor Epoxy Binder is a two-part epoxy binder used with Wall2Floor Rasal to enhance the performance of a micro cement base coat. Epoxy Binder mixed with Wall2Floor Rasal creates a hardened three-component epoxy-cement layer used in the Wall2Floor material system.

The Wall2Floor Epoxy Binder hardener should be mixed with the base layer of Rasal plaster immediately before starting work in the proportion of 1 set of Epoxy Binder (A + B) per 1 bag of RASAL microcement (25 kg) with the addition of 5-6 litres of water and thorough mixing until smooth states. The material's workability after mixing is no more than 1-1.5 hours, so it is important to prepare the mixture in batches by the possibility of production.

Three-component mixture of Rasal plaster with Epoxy Binder hardener is rational to use in commercial interiors with high operational needs or high foot traffic.

You can buy micro cement for floors and walls online through our online store, www.tbi.ua or from official Novacolor dealers in Ukraine.

Microcement in Kyiv can be bought in our showroom, "VOGUE INTERIORS", where decor samples in different colours are presented and interior samples are in large volumes.